Pedicure machines: tips on choosing and using

Feet care at home for women is quite easy, but it takes time, effort, certain knowledge and skills. A pedicure machine is one of the devices that solve the problem of rough skin. How to choose it and best used, we will tell in this article.

Problems with the skin of the legs and nails can be many. These are ordinary corns, ingrown nails, corns, rough heels, and even warts. A pedicure machine does not solve all these problems, but, of course, it can significantly alleviate the condition of the skin. This tool looks like a scraper with a blade. It is quite easy to use it, it cuts off unnecessary coarse dry skin from the corns and heels.

In the modern market, the device is sold as a set of models with different lengths and thicknesses., with a different blade and design. Most often, as a gift to the machine there is a grinding file and a set of interchangeable blades.

The machine can save you from many problems with the feet, but only if used correctly. Below we provide you with a brief instruction.

• Preparation of feet at home. The feet must first be prepared by steaming the skin on them. If you do not have salt for steaming your feet in the bath, you can use regular baking soda. The hydrogel will work best with this work, but this again, only if you have it at home. 20 minutes is enough for the procedure. In the presence of especially dense and coarse tissues on the skin, it is necessary to apply a cream on these places before soaking.
• Tool preparation. All this stage consists only in correct fixation of the blade on the machine. The blade is pressed against the retainer and snaps into place. This also includes the stage of processing the tool, if, besides you, someone else uses it.
• Foot treatment with antiseptic. This is done so that in case of an accidental cut, an infection is not scratched.
• Convenient location of the feet. It is very important. The razor should be at a 45 degree angle to the surface of the foot. At this angle, you should begin to slowly cut off the skin. You must take a position in which you could easily reach the entire surface of the foot. Skin should be cut off without pressure, in light movements, gradually.

• Machine calluses. After you have cut off the hardened fabric, proceed to the treatment of corns. The skin from them should be cut off separately and very carefully, if possible, tightening it. At the slightest discomfort, redness should stop working. In no case do not bring to the bleeding, then the wound will hurt for a very long time. Better to finish than to overdo it.
• Processing grinding file. This is required in order to remove all roughness and roughness of the skin.
• Moisturizing and soothing skin. This procedure is stressful for the skin, so after it you need to make a foot bath with oils or herbal decoction.
• Applying cream. Feet should be lubricated with a moisturizer with a high percentage of fat.

First of all, it is necessary to understand well that the use of the machine is not a panacea for all skin diseases on the legs.It helps well only when removing horny skin and dry corns. And for the best result, you will need not one session, but 2 or even 3 with some frequency. It is important not to overdo it. Too much skin will become more sensitive and will be subject to mechanical injury.

After the completion of the procedure, it is necessary not only to rinse the machine, but also to disinfect it. It is necessary to disassemble it and do the procedure with every detail. At home, alcohol or another similar liquid is quite suitable for this. After washing it is important to wipe the machine dry.

First you need to know what the device looks like. It consists of three parts: a head-holder, a blade and a handle. It should be noted that such a machine is only suitable for the treatment of cornified skin, for other purposes it can not be used.

Below is a list of companies producing machines, and their brief description.

• The machine with the characteristic name Titania. It is inexpensive, as the head is made of stainless steel, and the handle is made of plastic. Despite this, it is distinguished by European quality, durability and relative durability with proper care. May not always be effective in treating skin that is too coarse.
• Machines from Staleks. This company is engaged in the production of professional tools for pedicure. They are made of stainless steel, and have a classical form for machine tools. Blades are easily replaced with new ones.

• Pedicure machine Beter. It is also distinguished by European production, it has a non-standard shape stainless head and a plastic handle.
• Another good product is Zauber. The tool is completely made of stainless steel. It has one feature - its blades are made of titanium steel, which over time will not become dull and will not rust.
• The machine for professional masters of pedicure Olton. It is made of medical steel. Requires special multi-stage processing, but is of good quality and durable.

Before you start working with a pedicure machine, it is important to know that he carries out only "redecorating" the skin of the feet. At the same time, corns and knees will soon appear again, since the reason for their appearance lies in the medical field. The machine is a salvation for those who have moderately coarse skin, which sometimes you want to "lose" to feel light in the legs.

Opponents of the use of the machine quite a lot. Some cite the fact that they couldn’t “stretch their hands” and cut their heels, others that these procedures make the skin addictive, after which other procedures become useless. Be that as it may, caution and care in this matter, as in any other, has not been canceled. This procedure can always be gradually abandoned at any time.

Nevertheless, machining the heels with a machine gets more and more adherents every year. Many users have described that now you do not need to go to salons and spend money on the road and the work of the master. Learning technology is not difficult, you need only patience and perseverance. Most girls are satisfied with the fact that if they suddenly “turn up” a date, then you can not be nervous and not pull the master, who is busy for a week ahead.

Review pedicure machine "Profi" in the video below.