Malvinka hairstyle: types and recommendations for creating

The choice of fashionable hairstyles today is quite large. Every morning, women face the choice of styling. In priority: ease, speed of execution, as long as it looks neat and fit the owner. The choice is huge, it is only necessary to determine the type of hair, and then try to repeat it.

Today we look at one of the most common and simple hairstyles, it is called "Malvinka." It is suitable for every girl, neither the length of the hair nor the type of the face matter. It is universal, simple and at the same time refined.

The execution of this hairstyle will not be difficult. Consider two classic options, for which we need only one gum or a pair of stealth and a comb.

1. Gather the combed hair from ear to ear and tie up the tail with a rubber band at the crown. For larger volume, you can slightly strand hair strands, and only then tie a rubber band or fasten invisible.
2. Comb your hair, take on the strands of medium thickness from both ears, turn them back and tie a tail.

Due to its versatility, it is suitable for all girls and women. A more mature version will suit a well-combed version with a tail curled behind the back into a shell or a regular tail twisted into a tight bun. Some even hide the bald patch at the top of the head, brushing their hair and securing it. Young girls are available to different variations: with a tail, with a beam, with different types of weaving.

Regarding the type of person Malvinka fits any form, oval, square and triangular. To hide or emphasize the features, you need to use the desired variation of hair. For example, a square type with pronounced cheekbones will suit a hairstyle with straight hair, but for owners of the right face type it’s better to curl their hair.

There are many options "malvinki." With this hairstyle you can go not only to walk with friends, but also for a romantic dinner, party, celebration, wedding.

The source of the classics consider the option fixed by stealth:

• for a start, carefully comb your hair, spray it with lacquer if necessary, or smear it with a small amount of foam so that it fits well;
• separate the part of the hair from the forehead, mix it a little, attach it invisible on both sides;
• secure the strand taken from the temple on the back of your head so as to hide the invisible, do the same with the opposite side;
• wind hair up if desired.

The variant of the harnesses is no different from the classical one; it is made with two strands. It takes only a comb and rubber or stealth to hold, you can also use a crab barrette:

• First, comb your hair, use the fixative;
• separate the two symmetrical strands and twist them inside, tie them together with a rubber band at the back or fasten them with a crab;
• you can first twist one strand, securing it invisible from behind on the other side, then the second and fasten symmetrically to the first;
• You can decorate this hairstyle with various hairpins, scallops and other accessories;

Malvinka with a bow is gaining special prevalence. The bow itself will be made of hair, for this we will need a comb, a rubber band and some invisible women:

• comb your hair well, then take two wide strands and tie them at the back with a rubber band so as to leave a small loop;
• divide the resulting loop in half, fasten the halves with stealth to preserve the shape - these will be the “wings” of the bow;
• take the remaining tail and wrap it between two loops, lock it;
• You can decorate with a beautiful hairpin with rhinestone or with one bead by placing it in the middle.

One of the fastest, easiest options - twisted tail:

• First, carefully comb your hair, then comb it back;
• make the tail at the top of the head, leaving the lower part of the hair intact;
• slightly above the gum, make a hole and turn the tail into it;
• hide the gum, okrutiv her fine strand hair. Secure invisible.

Hairstyle "malvinka" of inverted tails.

• Separate top shovel hair and tie a tail at the back of the head. Then you should turn it out through the hole made above the rubber band.
• Collect the remaining hair at the temporal part, picking up the already tied tail above, tie it in one common tail. Make a hole again and turn the collected hair into it.
• You can decorate with beautiful crabs or studs with rhinestones, bows of ribbons.

It is very popular to use weaving in hairstyles. You can weave as ordinary braids, and openwork complex braids. Consider several options.

1. Having combed hair, take a small lock from a temple and braid a usual pigtail-cone.
2. Do the same with the opposite side.
3. Fasten the two braids together in the back, tie them up with a rubber band.

• Take two strands from the temples and twist them into bundles, fix with an elastic band, then you can braid a spikelet from the tail and tie it again with an elastic band. Or weave a braid and twist it into a flower, wrapping it around, fastening it with hairpins, and hide the remaining tail in a flower.
• Before twisting the strand, separate each small bundle by a small fine strand and braid the usual two braids. Twist the harnesses, tie them together with pigtails.
• Use a regular ribbon, twisting its tail, fasten it with a beautiful crab, rubber band. Hairstyle ready, fix varnish.

For him, you need to carefully comb your hair, dividing them in half. Then from one of the sides take a small shock of hair and divide it into three strands. Weave them together, laying strands on top of each other. Then, with the next binder, add strands of hair just on top. Weave it to the middle of the head. Weave the second half as well, fix both braids together with an elastic band, separate the strand, wrap around the elastic band, securing it with a pin.

He does not weave up, crossing the strands, and under the bottom. Add locks only from above, as you finish, finish the braid. Tie the rubber bands on one side and the other. Carefully pry strands of braids with your fingers. Fasten one of the braids on the opposite side with studs, do it with the second braid, hide the tails.

For him, divide the hair in half, on one side, take a strand of hair and divide it into two more strands. Twist them together once. Before the next scrolling to the bottom strands add hair from the total mass.

Similar to the classic weave. It is necessary to twist the strands over each other, when adding hair, release the top strand, replacing it with the auxiliary one on top. Braid it from both sides and fasten with rubber bands.

Take a bunch of hair on the top of your head and weave a braid out of it. Starting from the second weave, take a separated strand into the braid at the left temple, then at the right one. So add a couple more strands and fasten it all with one rubber band.

This type of hair can be done not only for long but also for medium and short hair. This can be a classic simple version, as well as complex with weaving.

One of the most popular types that can be made to any length - This "malvinka" in the form of a bundle. For this we need only a comb and a rubber band. Comb back the entire head of hair, gather the upper part of the hair, twist it into a bundle and wrap it with a rubber band. The more careless the bun will be, the more creative the hairstyle will look.

Comb the curls, take three identical strands from the forehead, you can twist them both up and down, picking up the hair with a binding on both sides. Reach the top of the head, tie a tail. Then twist it into a bundle and slightly stretch the hair strands, roll around the elastic band. Fasten your hair with a regular elastic or hairpin.

The classic look of "Malvinki" is also popular among young girls. The presence of accessories allows you to fix the "malvinka" not only with a rubber band or invisible, but also with different hairpins.

Step-by-step instruction "malvinki" with a pile on all lengths of hair.

1. Well washed and dried hair comb back.
2. Choose a strand from the forehead to the top of the head and slightly comb it with a comb, lift it up and secure it with invisible heads.
3. Take a strand from one of the temple and also fasten it with stealth, do the same with the other strand at the temple.
4. You can decorate with beautiful hairpins with stones or flowers.
5. Fix the result with varnish. Spraying lightly over the entire hairstyle.

Classic French braid do it yourself.

1. Comb your hair back, dividing it into three parts: the first from the forehead to the top of the head and two at the temples.
2. Remove the first part so that it does not interfere.
3. Take the remaining two and tie them back together in the tail.
4. Unfasten the first part, take three strands and begin to weave the French braid, weaving the strands of hair until they run out.
5. Braid the braid to the end, tie a small tail and gently pull the strands.

Bundle of tow.

1. Tie a piece of hair on the crown.
2. Divide the assembled tail into two equal parts, twist the bundles from the halves.
3. Connect two harness between each other with a rubber band.
4. Start spinning the overall harness, making the flower while holding the studs.
5. At will in the middle stick a hairpin with a pebble.

"Malvinka" with rubbers.

1. Tie the usual "Malvinka" rubber band.
2. Take the same tail and at a distance of 5 cm tie a rubber band, gently stretch the curls of hair.
3. Do this along the entire length of the tail, not forgetting to pull the beams.
4. Fix hair with lacquer.

Greek "Malvinka", for the implementation of this hairstyle, we need a piece-wrap hoop (headband, elastic band).

1. Comb your hair.
2. Put on the bezel.
3. Take on one side a thick strand and turn it through the bezel.
4. Pick up the next strand and again with the previous strand, turn it through the bezel.
5. Do the same on the other side.
6. Reaching the neck, leave part of the hair, without affecting, and turn the top into the bezel.
7. For more confidence, secure with additional studs. The remaining hair curl or leave it.
8. Fix with varnish and decorate with scallops or flowers.

Openwork Spit

1. Split the hair in half.
2. Separate the strand from the forehead, then divide it into three strands, intertwine them together under the bottom. Picking up hair, add them to the already created strands and cross them together, braid so to the back of the head.
3. Weave in the same way the second side.
4. Secure each other with a rubber band or stealth.

Openwork braid around the head.

1. Comb back all the hair, leaving a little hair in front.
2. Take three strands of hair from your temple and begin to weave an inverted braid (twisting the strands underneath).
3. Weave extra hair just on top. Weave in a circle, reaching the opposite side, continue to weave, weaving the remaining separated hair.
4. Having reached the beginning of weaving, dock the usual braid, tie a rubber band in hair color.
5. Hide the pigtail in your hair, securing the studs.

The simplest "malvinka":

• with two pigtails: Pre-curl the curls, take two strands and weave ordinary pigtails, tie them with silicone colorless elastics. Comb your hair at the top of the hair and spray with varnish; fix the pigtails with invisible hair;
• with two harnesses: do everything exactly in the above induced example, only instead of braids, twist the harnesses and tie them together with a common elastic band.

On how to make the hair "Malvinka", see the following video.