How to take off jeans at home?

Jeans are sewn to the established standards, so they look less attractive on girls with a non-ideal figure. Although there are separate collections for girls with a non-standard figure, but this cannot solve the problem completely.

If the figure only slightly deviates from the generally accepted parameters, then you can buy your favorite model of jeans and take it down a little. This process is quite simple, so it can be done independently at home.

Over time, your favorite jeans lose their shape, stretch. But do not say goodbye to them, because at home you can reduce them by size or even two.

To sew jeans on your own at home, you must prepare a sewing machine, a centimeter, threads, needles, scissors and pins. Stock up on free time.

If the jeans look great on you, but a little big in the belt, then the situation can be corrected by taking them along the back seam line and along the waist.

If the favorite model has become a little free, then it is worth making the stitching only along the side seams. To make a tapered bottom, it is necessary to take the jeans along the inner seams.

Many girls have a wide hips and a thin waist, so any pair of jeans will be loose at the waist. To solve this problem, jeans should be taken in one of two ways.

The first method is the easiest:

• First you need to make a few darts along the belt line.
• Next you need to carefully unpick a few centimeters of the belt.
• Thoroughly flash all darts.
• Cut off the extra centimeters on the belt, and then sew it back.
• It is necessary to be extremely careful when creating a tuck in the buttock area, since very long seams tighten them.

The second method is more complex, but qualitative:

• First you need to unpick the loaf, which is located behind the center. In some models it is necessary to eliminate three loops at once. If the brand label is located close by, it should also be removed.
• Carefully spread the belt, but only ten centimeters left and right of the middle seam of the product.
• Then you need to pay attention to the step seam, and make its spacer for eight or nine centimeters.
• Remove the remnants of thread, and iron all seams properly.
• The middle seam must be fastened on the front side with the help of pins in order to avoid possible displacement. Next, transfer the fastening with pins on the wrong side and steam off with an iron.
• Put the trousers together and draw a line at a slight angle about two centimeters apart.
• The drawn line must be stitched, and the edges of the fabric swept over.
• Next, turn the jeans on the front side and make two lines in the center.
• Go back to the inside, to sew up the stitch seam, and on the front side to finish the double line.
• The belt must be attached to the new size of the waist and cut off extra centimeters, but be aware of allowances.
• Next, the product must be folded in half, with the front sides inward, stitch and unfold before ironing.
• Fasten the belt and the main part of the product with pins and sew the loops back.

To reduce the size of jeans in the hips, they should be taken in along the side seams.

To calculate the distance that must be removed, you can use one of the methods:

• Unscrew the jeans on the wrong side and wear. With the help of pins mark the new seam.
• Take the pants that fit you on the figure, attach to them those that you want to sew and draw a line.

The process of reducing the volume of pants in the hips occurs in several stages:

• First, unscrew the belt.
• Next, undo the leg on the sides and stitch them along the new seams.
• Excess material sentiment cut off, and sweep the sides.
• Sew on the belt.

If jeans are spacious in the hips and waist, then the belt should not be steamed. Trousers must be completely unpicked and stitched to the new sizes.

For jeans from a thin denim, you can make tucks on the sides, then the model will be better to sit on the figure.

Very often, some jeans are a thing of the past, and new styles are replacing them. More recently, every fashionista had flared jeans in her wardrobe, but now they were replaced by narrow models. You should not part with your favorite jeans, because you can change them.

To take in jeans in legs, it is necessary to do the following actions:

• Unscrew the jeans on the wrong side, and try on.
• Pins mark the line for the new seam, but you need to take into account one centimeter, which will shrink the product after washing.
• Jeans must be removed, spread out on a horizontal surface and cut down from the knee downwards.
• Gently make throwing seams along the line, which is marked with pins, and put on again for fitting.
• Extra centimeters of fabric cut off.
• On the sewing machine to make strong seams on the metal.
• For edge processing, you can use a zigzag or overlock.

• Inexperienced needlewomen should not completely steam the leg, as the crotch area is very difficult to properly sew.
• When choosing threads, you should give preference to threads for sewing jeans, although they can be replaced with ordinary ones.
• All seams must be double stitched, which guarantees durability.
• Do not rush to cut the thread. The binding stitch must have stitches.