How to sew a hole on the jeans between the legs, on the knees or on the buttocks?

Jeans are present in the wardrobe for many. They are convenient, comfortable, but the holes that appeared over time force us to say goodbye to our favorite thing. To jeans still pleased us for a while, the holes can be patched, hidden application or patch.

The technique used to mask a hole with a sewing machine is called docking. It is indispensable for the repair of men's jeans.

The sewing machine should have the function of laying the stitch in the forward and reverse direction.

You will need threads of the same color with a cloth, a patch, a piece of non-woven fabric larger than the patch.

On the seamy side of the patch is applied, and on it flizelin. All iron iron.

From the front side we “hammer” the hole with stitches. The first stitch is sent forward, then move the machine on the reverse mode and lay the next stitch. The width between the stitches is equal to the width of the thread. It turns out a dense surface of the filaments, which, as it were, paint over the hole.

The final moment - we get rid of the extra fabric of the patch and non-woven fabric, that is, we simply cut off the unnecessary. There will be no trace of the hole, plus it will be completely invisible.

It will be very interesting to look like a piece made in contrasting color threads. The work done will focus attention and look unusual.

You can manually sew a hole that looks like a right angle or a cut in the form of a straight line. The threads used should match the tone of the jeans, that is, be invisible.

Stitches are applied frequently so that there is no distance between them. Their size is the same.

In case repair of a hole does not allow making it inconspicuous, perform an application. It will hide the visible flaw and become a stylish element of the decor, thereby reviving your favorite thing.

The application can be done independently or buy ready-made. As a rule, factory applications have a glue base and are easily attached to the fabric with a hot iron. As a result of several washings, they can peel off. It is better to fix them additionally with threads.

If you decide to perform the application yourself, then you can use a different material. Effectively combines jeans and leather. You can use beads, braid, decorative buttons or just a fabric of different texture. The scope of your imagination is not limited.

Floral motifs give elegance, and ethnic - style. Kitties, butterflies, fish - all this turns jeans into a nice and cozy thing.

Golden shades make your jeans gorgeous.

1. For the restoration you will need a piece of denim. Very often, manufacturers add a piece of cloth of the same color to a new item just in case you need to repair a product. If such a piece of fabric is missing, then any other, dense texture will do. A patch is cut from it.
2. Wrench jeans on the wrong side and put our patch on the hole. Next, a glue cloth is applied on top. It is slightly larger than the patch. Do not confuse. A rough glue surface must be in contact with a piece of our denim patch.Cover with still one piece of fabric. It will prevent the ingress of glue on the iron.
3. It remains only to iron the entire resulting "bookcase" with an iron, but first you must sprinkle it with water.
4. The front side of the hole is sewn with a zigzag stitch with frequent stitches with a maximum stitch width. The lines should go over each other by 0.1 cm.
5. We stretch the threads on the wrong side and fasten them so that the stitches are not broken. The remaining glue fabric is cut with scissors.

The hole that appeared on the knee is very noticeable. It can be duged by the method of fitting, which is described above.

At the same time, there is one important point: it is inconvenient to lay the seam, so it is necessary to rip the jeans along the outer side seam about 20 cm from the inside. The hole in this way will be exactly in the middle of the ripped part.

Factory and overlaid lines are removed with nail scissors. At the same time we leave the ends of the strings so that they serve as a guideline for the final assembly.

Next, glue the hole with glue and iron and impose tightly machine lines.

If the color of jeans on your knee is not monochromatic, resembling a gradient, then you will have to use several colors that match the tone.

It takes a maximum of accuracy to sew holes formed between the legs. Without a patch can not do. It is applied from the seamy side and for convenience it is fastened with pins.

We impose a seam along the patch perimeter. On the front side, the disheveled edge of the hole also clings to the patch.

Important!

If the size of the hole is pretty impressive, then the best option would be to apply a patch.

On children's jeans it is better to make an application.

With the original design, your jeans will always be in a winning position.